This package includes a 10 amp MPPT solar charger and cables to connect solar panels producing up to 150W with MC4 connectors. NOTE: Solar panels are NOT included!
Blocking diode is included in the junction box to eliminate battery discharge/draining at night
Cable has 36 in. of 12 AWG solar cable leads and PV connectors pre-attached
Advanced MPPT control allows you to receive the maximum energy from the solar panel. Dual LCD display offers a convenient user application for different monitoring needs.
MPPT Charge Controller with protection built-in against reverse polarity, overcharging, over-discharging, overload, short-circuiting, and reverse current. It protects the battery from being overcharged by the solar modules and over-discharged by the loads.
Specifications – Solar Controller (MPPT):
Rated charge current: 10A.
Rated discharge current :10A.
System voltage: 12/24V DC Auto.
Max. PV input power: 150W/12V 300W/24V.
wire size : 4mm2/12AWG.
Grounding: Common Negative Ground.
10 Amp MPPT
Wire A: 4-ft wire with MC4 connectors at one end and a large grey Anderson connector at the other
Wire B: has small red/black connector and large grey Anderson connector, to connect Wire A to the input of the MPPT
Wire C: has small red/black connector and large black Anderson connector, to connect output of MPPT to a Joule Case controller